Running boards are one of the most popular aftermarket truck accessories. Running boards are meant to make it easy for you, your family and friends, and even pets to enter and exit your truck. They can be beneficial if you have a large vehicle or transport something bulky.
There are a few different types of running boards available, so you'll need to choose the ones that best fit your needs. Some running boards are attached permanently to the vehicle, while others are removable. You'll also need to decide whether you want running boards that extend all the way to the door or just halfway. It`s not allowed to stay on running boards while driving.
Once you've chosen the right running boards for your truck, installation is a breeze. Most running boards come with simple instructions that are easy to follow. You'll need to drill holes in your truck and use the included screws to attach the running boards. It shouldn't take more than an hour or two to install them.
Let's first look into the tools you'll need to install a running board to your truck. They include;
Socket set and Ratchet
Gloves and Safety Glasses
Box End Wrenches
Creeper/padded mat (optional)
However, you might need particular tools for different trucks. For example, you will not be able to set the same running boards for Dodge Ram and Toyota Tunda - for each model you need to choose the right product. Running boards can also be tool-specific, especially those delicate power running boards.
Power running boards can also be called power deployable or fold running boards. They are always deployed when the car's door opens. They are usually a bit more expensive than manual running boards, but they offer a lot of convenience and safety.
To install power running boards, you'll need to remove the old ones (if any) and drill new holes in your truck. You'll also need to run wiring from the door to the board. The installation process is a bit more complicated than with manual boards, but it's definitely worth it in the end.
The general procedure of installing running boards is as follows:
Remove the old running boards (or cut them off at the doorframe if they are not removable).
Drill holes in your truck and attach the running boards with screws.
Test the fit and make any necessary adjustments.
Enjoy your new running boards!
Now let's look into installing running boards in different trucks.
How to Install Tundra side step
Toyota Tundra's side steps can be helpful in several ways. They can make it easier to enter and exit your truck, and they can also provide a place to stand while you're loading or unloading cargo.
There are a few types of running boards that you can choose for your Toyota Tundra. The most popular type is the side step, which extends from the door to the bottom of the truck. These running boards are easy to install and provide a convenient place to stand while you're loading or unloading cargo.
Another type of running board is the nerf bar, a tubular bar that runs along the length of the truck. Nerf bars are designed to protect your vehicle from scratches and dents. They are also easy to install and can be used as a step to enter and exit your truck.
If you're looking for a more luxurious option, you might want to consider power running boards. These boards are
Installing Toyota Tundra side steps is a breeze. All you need are a few simple tools and about an hour of spare time.
This is the procedure of installing a Toyota Tundra sidestep.
Remove the six plastic screws in three positions on either running board in the mounting holes.
Place M8 Hex bolts into the Tundra's threaded holes through the bracket holes.
Make sure the running board clocks with the brackets. Be sure to align the front mounting position first.
Place the M6 bolts into the threaded holes through the brackets, starting with the front. Tighten the bolts with a socket set and ratchet. Do not overtighten.
Attach the running board to the bracket with an M8 hex bolt. Use a box end wrench to hold the bolt while you tighten it with a socket set and ratchet.
Repeat this process on the other side.
Once both running boards are attached, test the fit and make necessary adjustments.
That's how to install Toyota Tundra Running Boards.
How to Install Jeep Gladiator Side Steps
Why install nerf bars? Well, they do several things for you. First, they protect your doors from parking lot dings. They also provide a place to stand when you're cleaning your truck, and they make it easier to get in and out.
There are a few types of Gladiator Side Steps that you can choose for your truck. You can choose from nerf bars, side steps, or running boards.
Nerf bars are the smallest and most basic type of running board. They attach to the frame of your car and are used to protect your car's doors from getting dinged. They also provide a place to stand when you're cleaning your car.
Side steps are larger than nerf bars and provide a more substantial platform to stand on. They also make it easier to get in and out of your car.
Running boards are the largest and most expensive type of running board. They provide the best platform to stand on, making it.
You'll also need to decide whether you want nerf bars that extend all the way to the door or just halfway.
Here's the procedure for installing Jeep Gladiator Side Steps .
Remove and discard any factory-running boards.
Match the brackets with the original mounting points, with the horizontal part of the bracket outside the pinch weld.
Afterward, starting with the center bracket, put one M8(30mm) head-flanged bolt in the factory threaded hole. Don't tighten it yet!
Install the provided M8(25mm) Zinc-flanged bolts and nuts into both the front and rear mounting brackets. Leave them loose.
Install the remaining M8(30mm) bolts in either rear bracket and leave them loose too.
Adjust the side step until you're comfortable with its height and level with your truck's body.
Tighten all the loose bolts and nuts and ensure the bracket attaches to the vehicle's pinch weld perfectly.
Lastly, tighten all the remaining parts to attach the brackets to the vehicle's upper body mount.
Repeat steps 2-8 on the passenger's side.
That's how to install Jeep Gladiator Running Boards.
How to Install Ford F-150 Running Boards
Adding running boards to your Ford F-150 is a great way to improve the look of your truck while also providing you with a more functional platform. Not only will running boards give you a place to stand when you're loading or unloading cargo, but they can also provide you with added stability when entering and exiting your truck.
If you're looking for an easy way to add some functionality and style to your Ford F-150, then installing running boards is definitely the way to go.
There are a few different types of running boards that you can choose for your Ford F-150. The most popular type of running board is the traditional step board, which is a basic board that extends from the side of your truck. If you're looking for a more stylish option, you might want to consider getting a set of tubular running boards. These boards are made from aluminum and have a sleek, modern look.
If you're looking for something that provides more functionality, you might want to consider getting a set of nerf bars. Nerf bars are essentially vertical tubes that run from the front to the back of your truck. They provide a lot of added stability when entering and exiting your vehicle, and they also make
Here's how to install running boards on your Ford F-150.
Remove and discard any factory-installed running boards from your truck. You can start behind the front wheels on the driver's side.
You'll find two bolts there; 10mm and 13mm. That's typically what's on the rear. Detach these two bolts from their mounts. That will help you with lifting the bar. Afterward, loosen the remaining bolts to remove the old mounting.
Add a clip to the center visible square (you can see three at this point) and make sure the bumpy part faces the floor.
Take the shorter screws between the two provided in the installation kit and install them into the running board. These screws will help hold the board in place as you reattach it to your truck.
Once the running board is in place, reattach it to your truck by bolting it in with the original bolts. You'll want to ensure that the running board is level before tightening everything down.
Once you've finished installation, enjoy your new running boards!
How to Install Chevy Silverado Running Boards
The Chevy Silverado is one of the best off-roading full-size trucks. It is capable of giving you thrilling adventures in the most gruesome terrains without ruining your off-road experience.
For one reason or the other, you'll need a quality pair of power running wheels for your Chevy Silverado. In this section, we'll be looking into installing running wheels on the Chevy Silverado.
There are a few types of running boards that you can choose for your Chevy Silverado. The most common type is the nerf bar type, which is a simple tubular bar that spans from one side of the truck to the other.
Nerf bars are usually made of metal or plastic, and they're easy to install and use.
If you're looking for a more premium running board, you can choose a board made from carbon fiber or wood. These boards are often more expensive, but they also look and feel more luxurious.
They're also a bit harder to install, so make sure you have someone to help you out if you go for this option.
Here's How to Install Silverado Running Boards
1. Park the truck on a level surface and engage the parking brake.
2. The running boards are designed to fit the Silverado models with the body-cladding trim along the lower sides. If your Silverado doesn't have this trim, then the running boards may not fit properly.
3. Remove the bolts that secure the side-view mirror to the door using a socket wrench. There are four bolts on each mirror.
4. Carefully pry off the mirror using a pry bar. Make sure you don't damage the paint or trim on the door.
5. Locate the mounting brackets for the running boards and remove the protective coverings.
6. Align the running board brackets with the screw holes on the door. The brackets have a protractor-like design that helps in alignment.
7. Drill pilot holes into the door using a drill bit that's slightly smaller in diameter than the screws that come with the running boards.
8. Fasten the mounting brackets to the door with the screws that come with the running boards.
9. Reinstall the side-view mirror and tighten the bolts using a socket wrench. Make sure you don't over-tighten the bolts, as this could damage the mirror or the trim on the door.
That's how to install power running boards on the Silverado.
Running Boards Conclusion
Running boards are essential components in every vehicle. They provide a step for the passenger to get into and out of the car easily. They also protect the vehicle against scratches and dents.
In this article, we have looked into the different ways of installing running boards in various types of trucks. I hope the article was helpful.
